Here is our Signature Series stepper motor drive controller. This controller is state-of-the-art, utilizing the latest breakthroughs in CNC motion technology. Our controller allows you to use a standard PC, Pentium 4 or above, and perform any function that a CNC Router or Plasma Cutter can perform these days. Coupled with our PR-1000 control interface, this combination gives you the right solution for controlling today's stepper motor technology.
Our Drive of Choice
The Gecko Vampire offers the most in short-circuit protection out of all the drives in their inventory, from the G201 thru the G203. Use these rock solid drives and be able to sleep peacfully at night!
$146
G203V 10-Microstep Drive
•7A 80VDC
•Short-circuit protection
•Reversed-polarity protection
•Over-temperature protection
•Over-voltage protection
•Optoisolated Step, Dir and Disable Inputs
•Optoisolator Common is ground
•2.5V, 3.3V and 5V logic compatible inputs
•Recirculate mode while motor is stopped
•350 kHz maximum Step pulse frequency
•Top settable Adjust trimpot
•Power and Error LED indicators
•No user settable jumpers inside
•Internal socketed fuse
•Power-on reset
•20 kHz switching frequency
•Same size and terminal pin-out as the G201
$136
G202 - Step Motor
Microstepping motor drive
• 7A, 80VDC 10-microstep drive
• Short-circuit protection
• Mid-band resonance damping
• Silent 20kHz PWM switching
• No low-speed vibration
• Opto-isolated step and direction
$132
G201 - Step Motor
Microstepping motor drive
• 7A, 80VDC 10-microstep drive
• Opto-isolated step / direction
• Mid-band resonance damping
• Silent 20kHz PWM switching
• No low-speed vibration
CNC Routers and Plasma Cutting Tables
Proudly made in Oklahoma, USA
PlasmaRoute CNC
15041 CR 1450
Ada, OK 74820
866-352-0169
